EPSON RC180

SKU: R11N00X031
Request a Callback

EPSON RC180

Request a Callback
SKU: R11N00X031

Works According to Instruction

Request a Callback
Overview

Overview

Overview

Even though its footprint may not be much larger than a DIN A4 sheet, the RC180 is a true space wonder, and extremely powerful to boot. The small clever one with the outstanding cost-performance ratio was mainly designed for slave operation within a network.

The Epson RC180 can be used equally for SCARA robots and 6-axis robots. Moreover, the option units designed as a modular system provide further interfaces and technology modules.

Lightweight

Basic unit for SCARA robots: 7.5 kg

Basic unit for 6-axis robots: 9 kg

Option unit: 1 kg

Advantages of Epson RC180

- Smallest and lightest controller of its performance class on the market

- Extremely compact – can also be installed in a switch cabinet

- Different installation types

- Plug-and-Produce

- Fully network-compatible via integrated Ethernet interface – without surcharge

- High availability and minimum maintenance

- Extended communication through fieldbus, RS-232C and I/O

- USB back-up for determination of controller status at any time

Mounting options

Thanks to the embedded system with no hard disk, the RC180 can be mounted in different positions, e.g. horizontally or vertically on floor, ceiling or wall. Suitable mounting brackets are supplied for all installation directions.

What is in the box?

EPSON RC180 whats in the box
  1. 2 Sets of mounting brackets for the robot controller (RC180)
  2. Back-up disc of the robot controller (RC180)
  3. Connector for standard I/O
  4. Emergency stop connector
  5. Epson RC+ program CD including simulation software
  6. Installation/safety manual
  7. TP/OP bypass plug (installed before shipment)
  8. USB programming cable (for RC180)

Tech Specs

The product features and specifications are subject to change without prior notice

General

Development Environment
EPSON RC+ 5.0
Programming Language
Epson SPEL+ (multitasking possible)
CPU
32-bit ultra-low voltage processor
Interfaces
USB 2.0-A (2x), Ethernet interface (100 Base-TX / 10 Base-T), 24/16 Standard E/A Channels
Safety features
AC power supply voltage reduction detection, Motor overload detection, Dynamic brake, emergency stop switch, Encoder cable disconnection error detection, Fan error detection, CPU irregularity detection, Low power mode, Memory check-sum error detection, Motor speed error detection, over-voltage, Overheat detection at the Motor Driver Module, Positioning overflow - servo error - detection, Relay welding detection, Safety door input, servo error, Speed overflow - servo error - detection, Temperature error detection
Supply Voltage
AC 200 V - 240 V, 50 Hz - 60 Hz
Ambient temperature
5 ° C - 40 ° C
Relative Humidity
20 % - 80 % (no condensation)
Dimensions
Base Unit: 302 mm x 275 mm x 170.5 mm (Width x Depth x Height), Option Unit: 55 mm x 275 mm x 130.5 mm (Width x Depth x Height)

Download additional information